Roland M-5000 Specs

 M-5000

M-5000C

Mixing Channels

Up to 128 CH (combination of INPUT CHANNEL, MAIN, SUBGROUP, AUX, MIX-MINUS, MATRIX, MONITOR, COMM, OSC, HEADPHONES)

Inputs

Max 300 ports (96 kHz), Max 460 ports (48 kHz / 44.1 kHz)

• CONSOLE: 16  .AES/EBU: 4 .REAC: 40 x 2

• EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)

• USB AUDIO: 16 .DOCK: 2 .USB RECORDER: 2

• FX 1L-8R: 16 .TALKBACK: 2 .OSC: 2

Outputs

• AES/EBU: 4 • REAC: 40 x 2 • USB AUDIO: 16

• EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)

• USB AUDIO: 16 • DOCK: 2 • USB RECORDER: 2 • FX 1L-8R: 16

Max 296 ports (96 kHz), Max 456 ports (48 kHz / 44.1 kHz)

• CONSOLE: 16

Max 288 ports (96 kHz), Max 448 ports (48 kHz / 44.1 kHz)

• CONSOLE: 8

Internal Processing

72 bits (fixed point, bus summing)

Signal Processing

AD/DA Conversion: 24 bit

Sampling Rate: 96 kHz, 48 kHz, 44.1 kHz

Console Latency

Network Latency: 1.6 ms (typ.)

Console Latency: 1.1 ms (typ.)

* Network Latency: Total system latency of audio signal from S-2416 inputs to outputs via M-5000’s REAC ports (A or B).

* Console Latency: Total system latency of audio signal from console inputs to console outputs.

* Sampling rate: 96 kHz

* Effect: No insert effects

* When a REAC Splitter S-4000D or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependent upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds.

 M-5000

M-5000C

Connectors

INPUT jacks (1 – 16): XLR-3-31 type (balanced, phantom power)

TALKBACK MIC 2 jack: XLR-3-31 type (balanced, phantom power)

AES/EBU IN jacks (1/2, 3/4): XLR-3-31 type

PHONES 1 jack: Stereo 1/4 inch phone type

PHONES 2 jack: Stereo miniature phone type

AES/EBU OUT jacks (1/2, 3/4): XLR-3-32 type

REAC ports (A, B, SPLIT/BACKUP): RJ-45 EtherCon type, REAC SPLIT/BACKUP port supports REAC EMBEDDED POWER.

WORD CLOCK connector (IN, OUT): BNC type

RS-232C connector: DB-9 type

MIDI connector (OUT/THRU, IN)

USB port (MEMORY): USB type A

USB WLAN ADAPTOR port: USB type A

USB COMPUTER port: USB type B

LAN port: RJ45 type

DOCK CABLE port: 10-pin mini DIN type

GP I/O port: DB-25 type

FOOT SWITCH jacks (1, 2): 1/4-inch TRS phone type V/500 mA

EXT.POWER DC IN jack: XLR-4-32 type

* XLR type: 1 GND, 2 HOT, 3 COLD

* Phantom power: DC +48 V (unloaded maximum), 14 mA (maximum load) (All XLR type inputs)

OUTPUT jacks (1 – 16) : XLR-3-32type (balanced)

LAMP jacks: XLR-4-31 type × 2, LAMP power DC+12 V/500 mA

OUTPUT jacks (1 – 8) : XLR-3-32type (balanced)

LAMP jacks: XLR-4-31 type × 1, LAMP power DC+12 V/500 mA

 M-5000

M-5000C

Frequency Response
(typ. *1 *2)

PHONES jacks (1, 2): -2 dB / +0 dB (32 ohms load, 150 mW, 20 Hz to 40 kHz)

OUTPUT jacks (1 – 16): -2 dB / +0 dB (20k ohms load, +4 dBu, 20 Hz to 40 kHz)

OUTPUT jacks (1 – 8): -2 dB / +0 dB (20k ohms load, +4 dBu, 20 Hz to 40 kHz)

Total Harmonic Distortion + Noise (typ. *1 *2)

PHONES jacks (1, 2): (1, 2): 0.01 % (32 ohms load, 150 mW)

OUTPUT jacks (1 – 16):  0.007 % (+4 dBu)

OUTPUT jacks (1 – 8):  0.007 % (+4 dBu)

Dynamic Range
(IHF-A, typ. *1 *2)

OUTPUT jacks (1 – 16): 102 dB

OUTPUT jacks (1 – 8): 102 dB

Crosstalk @ 1 kHz (IHF-A, typ. *1 *2)

INPUT jacks (1 – 16): -100 dB

OUTPUT jacks (1 – 16):  -109 dB

OUTPUT jacks (1 – 8): -109 dB

Input Impedance

INPUT jacks (1 – 16): 7 k ohms

TALKBACK MIC 2 jack: 4 k ohms (Phantom: ON)

Nominal Input Level (Variable, typ.)

INPUT jacks (1 – 16): -65 to -10 dBu (Pad: OFF), -45 to +10 dBu (Pad: ON)

TALKBACK MIC 2 jack: -65 to -10 dBu

Non Clip Maximum Input level (1 kHz, typ.)

INPUT jacks (1 – 16): +8 dBu (Pad: OFF), +28 dBu (Pad: ON)

TALKBACK MIC 2 jack: +8 dBu

Output Impedance (typ.)

PHONES jacks (1, 2): 45 ohms

OUTPUT jacks (1 – 16): 600 ohms

OUTPUT jacks (1 – 8): 600 ohms

Recommended Load Impedance

PHONES jacks (1, 2): 32 ohms or greater

OUTPUT jacks (1 – 16): 10 k ohms or greater

OUTPUT jacks (1 – 8): 10 k ohms or greater

Minimum Load Impedance

PHONES jacks (1, 2): 16 ohms

Nominal Output Level (ty.)

OUTPUT jacks (1 – 16): +4 dBu (Load impedance: 10 k ohms)

OUTPUT jacks (1 – 8): +4 dBu (Load impedance: 10 k ohms)

Non Clip Maximum Output level (1 kHz, typ.)

PHONES jacks (1, 2): 500 mW + 500 mW (40 ohms load)

OUTPUT jacks (1 – 16): +22 dBu (10 k ohms load)

OUTPUT jacks (1 – 8): +22 dBu (10 k ohms load)

Residual Noise Level
(IHF-A, typ. *1)

-89 dBu (All faders: Min)

-82 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE INPUT channel, Preamp Gain: Min)

-50 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE INPUT channel, Preamp Gain: Max)

* Input 150 ohms terminate

* Output Connector: OUTPUT jacks (M-5000: 1 – 16, M-5000C: 1 – 8)

Equivalent Input
Noise Level
(E.I.N.) (IHF-A, typ. *1)

-127 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE INPUT channel, Preamp Gain: Max)

* Output Connector: OUTPUT jacks 1 – 16

* Output Connector: OUTPUT jacks 1 – 8

 M-5000

M-5000C

Display

Graphic color LCD 800 x 600 dots (touch screen)

Graphic organic light emitting display 256 x 64 dots: Fader Bank Display x 7, User Assignable Display x 1

Graphic organic light emitting display 256 x 64 dots: Fader Bank Display x 5, User Assignable Display x 1

Power Consumption

180 W

Dimensions

934 (W) x 725 (D) x 346 (H) mm

36-13/16 (W) x 28-9/16 (D) x 13-5/8 (H) inches

740 (W) x 725 (D) x 346 (H) mm

29-3/16 (W) x 28-9/16 (D) x 13-5/8 (H) inches

Weight

36 kg,  79 lbs 6 oz

32 kg, 70 lbs 9 oz

Operation Temperature

+5 to +40 degrees Celsius

+41 to +104 degrees Fahrenheit

Accessories

Owner’s manual, Power cord, Dock cable, REAC connector cover x 3, Ferrite core x 6, Cover

Tablet sheet x 2

Tablet sheet x 1