Audix TM-1 Plus Test and Measurement Condenser Instrument Microphone

Audix TM-1 Plus Test and Measurement Condenser Instrument Microphone Overview: The TM1PLUS is a combination kit which includes the TM1 measurement microphone, threaded acoustic windscreen, shock mount clip, ½ inch calibrator adaptor and microphone calibration data on CD The data files are a numeric representation of the TM1 frequency response.

These, along with the provided sensitivity of the microphone, can be used with a variety of popular software measurement systems to correct the response curve of the microphone The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications.

Known for its linearity, the TM1 is very consistent and has a particularly accurate response The TM1Plus is not complicated to use and with the additional supplied accessories is great value.

Characterized with a uniformly controlled omni-directional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.

Requiring 18 – 52 V phantom power for operation, the TM1 features a precision machined four stage brass body and capsule housing, nickel plate finish, Switchcraft or Audix XLR and shock absorbent O-ring Features: 6 mm pre-polarized condenser capsule High SPL response Precision machined brass housings Low noise electronics Replaceable electronics and capsule Applications Test and measurement Room analysis software programs Real time analyzers Ambient room miking What’s In The Box: 1 x TM1 Test & Measurement Microphone 1 x Windscreen 1 x Shock Mount Clip 1 x Calibration Adaptor For Use With ½ inch Calibrators 1 x Sensitivity & Calibration Data CD Specifications: Transducer Type: Pre-polarized Condenser Frequency Response: 20 Hz – 25 kHz +/-2 dB Polar Pattern: Omni Output Impedance: 200 ohms Sensitivity: 6 mV / Pa @ 1k Maximum SPL: 130 dB with distortion <1% ; 140 dB Max Signal to Noise Ratio: 66 dB Equivalent Noise Level: 28 dB (A weighted) Dynamic Range: 112 dB Power Requirements: 24 – 52 V Phantom Power Consumption: 8.9 mA @ 48 Volts Connector: Switchcraft or Audix mail XLR Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Materials / Finish: 4 piece precision machined brass / Nickel Finish Weight: 132 g / 4.7 oz Length: 150 mm / 5.9 in.