DBX 286SV-EU MIC PREAMP / PROCESSOR
₹29,537.00
The dbx® 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy® compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. Features -Studio quality Mic Preamp/Channel Strip Processor -Classic dbx Compression puts great sound within easy reach -Frequency tunable De-Esser reduces sibilance and high frequency distortion -Enhancer increases the detail and definition of the high and low frequencies -Program adaptive Expander/Gate -Insert jack allows you to add an external processor -Full compliment of meters and status LEDs -+48V Phantom Power -Precision detented controls Tech Specs
Mic Preamp Connector | XLR Floating balanced, Pin 2 Hot |
Mic Preamp Input Impedance | ~4.2kΩ |
Mic Preamp gain | 0dB to +60dB |
Mic Preamp Phantom Power | +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors |
CMRR | >40dB, typically 55dB |
Mic Preamp max input level | 0.2Vrms, Gain = 30dB |
Mic Preamp Equivalent Input Noise | (EIN) -125dBu, 22Hz-22kHz, 150Ω source impedance |
Input Connectors | (line) Floating balanced, TIP Hot |
Input Impedance | (line) 10kΩ unbalanced, 20kΩ balanced |
Max Input | (line) >+21dBu, balanced or unbalanced |
Input Gain Range | (line) -15dB to +45 dB |
Insert Connector | 1/4" TRS: Normalled; tip is Send, ring is Return |
Insert Impedance | >5kΩ (ring-return); 100Ω (tip-send) |
Insert Max Level | >+21dBu; >+20dBm (600Ω load-tip) |
Insert Noise | |
Insert Distortion | <0.01% THD, 20Hz-20kHz, +10dBu |
Output Connectors | 1/4" Balanced/Unbalanced TRS Connectors |
Output Impedance | 100Ω unbalanced, 200Ω balanced |
Max Output | >+21dBu, >+20dBm (600Ω load) |
Gain Adjustment Range | -30dB to +10dB |
Noise | |
Frequency Response | 20Hz to 20kHz, +0.5, -0.5dB |
THD | <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF |
Compressor Threshold Range | -40dBu to +20dBu |
Compressor Threshold Characteristic | OverEasy® |
Compressor Ratio | >4:1 For input levels beyond 20dB above threshold |
Max Compression | 30dB |
Compressor Attack Time Program-Dependent; | >1s for small level increases, down to 10ms for larage increases |
Compressor Release Time Program-Dependent; | adjustable between approximately 1dB/sec and 75dB/sec |
Compressor Distortion Typically | <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0 |
IMD SMPTE: | <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0 |
De-esser Characteristic Wideband | Gain Reduction |
De-esser Frequency Range | 800Hz to 10kHz High Pass, 12dB/octave |
De-esser Release Time | 12dB/octave Program-Dependent; approximately 1mS/dB |
Enhancer HF Detail Characteristic | Program-controlled shelving equalizer, approximately 15dB maximum HF boost |
Enhancer LF Detail Characteristic | Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1 |
Expander/Gate Threshold Range | OFF to +15dBu |
Expander/Gate Ratio | Adjustable 1.5:1 to 10:1 |
Expander/Gate Max Depth | >50dB |
Expander/Gate Attack Time | Program-Dependent, approximately 2mS (at maximum attenuation) |
Expander/Gate Release Time | Program-Dependent, approxiamtely 10mS/dB |
Expander/Gate Dynamic Range | Typically 105dB |
Power Consumption | 15W |
Operating Voltage | DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz |
Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Dimensions | 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm) |
- Studio quality mic preamp/channel strip processor
- Classic dbx Compression puts great sound within easy reach
- Frequency tunable De-Esser reduces sibilance and high frequency distortion
- Enhancer increases the detail and definition of the high and low frequencies
- Program adaptive expander/gate
Weight | 3 kg |
---|---|
Dimensions | 5 × 15 × 49 cm |
Please Note!
Kindly confirm product availability before placing your orders. Call/WhatsApp +91 9841538455
Available on back-order
Category Processor
Orders Placed on Thu, Nov 21 will be shipped on Mon, Nov 25*. Tracking will be shared by sms and email on Tue, Nov 26*. These dates are tentative and are subject to change without prior notice.
Delivery Timeline: Tamil Nadu (1-5 Working days from day of shipping), Other States (2-7 working days from day of shipping)